System Power Flush
A powerflush is a cleansing process which aims to remove deposits of sludge, rust and any other debris from your central heating system. These contaminants, if left, can seriously affect the efficiency of a heating system and in severe cases a powerflush is the only option available. The overall aim of a powerflush is to restore the full circulation of water around the central heating system, however, it can also eliminate noise from the boiler and the pump as well. This means that the entire system has to be flushed in order to get the best results.
A heating engineer will connect a powerful high flow/low pressure pumping unit to the central heating system – either to the circulation pump in regular boiler systems or the pump head in combination boilers – and with the help of high strength cleansing chemicals will flush out anything in the system. The chemicals used during a powerflush include a sludge crust breaker and remover to help get rid of rust and sludge, a descaler to break down limescale and a corrosion inhibitor to stop further rusting from occurring. The crust breaker and remover are acid-based so that they help to combat any rust present and any other debris, such as sand particles, that might have settled in the radiators, pipes and boiler. At the end of the process there is no acid left in the central heating system’s water.
The process is clean and safe when done by a professional and can quickly eliminate cold radiators and noisy boilers and pumps thus restoring your heating system to the condition it was when new.
Power Flush Prices
Call out Charge – up to & including 10 radiators: – £300.00
Each Additional Radiator between 11 – 15: – £35.00
Each Additional Radiator up to a maximum of 20: – £25.00
This include inhibitors and chemicals.
All costs subject to VAT at standard prevailing rate.
For more information or to speak to someone directly… Call 01844 281900 or send us an email
The Old Inn, London Road, Postcombe OX9 7ED